based on IVECO, FIAT, Mercedes, Ford or VW cab chassis
buy it as an empty shell, converted to any stage of your requirements or fully converted to Easy Life Motorhomes standards

First pictures of the Little Bastard on FIAT Ducato cab chassis
Our Little Bastard of IVECO Daily cab chassis, with Dometic windows and Camec security door

Our Little Bastard conversion shows the future way of building motor homes. Gone are the times when a motor home had a plywood floor, metal frame, ply internal cladding and 1 to 1.5mm fibreglass skin.

The future is called composite panel shell (sandwich construction).

What is a composite panel?

A 2.5mm thick, gel coated outer layer, bonded to a 20 to 35mm thick insulating foam, finished off with a 2.5mm thick inner fibreglass layer. The result is a tough, weather proof shell with unseen insulation properties.

It's non de-laminating, easy to repair and not to forget, lightweight construction.

Our panels are bonded together with SIKA products and the internal edges are reinforced with fibreglass matting. The floor panel (24mm thick) is bonded to a galvanised support structure. The panels we use for our motor homes are Queensland made and backed by a 10 year manufacturers warranty. Last but not least, the panels can be manufactured in any automotive colour to match your vehicles colour.

A few pictures of the manufacturing process:

All galvanised sub-frame	Wall fitting
The pre-fab roof	The assembled shell

Dimensions:

Internal width	from 200cm to 210cm
Internal height	from 190cm to 210cm
Internal length	from 360cm to 500cm
Minimum external height	275cm

Just a few of the possible floorplans:

A few internal pictures

The practical kitchen	View in to cabin
Shower and hand basin	The electric panel

The standard equipment of the Little Bastard

Because all our Little Bastards are individually built to your order, there is no standard equipment to be listed.

It's the same as choosing an architect to design your home. You tell us what you need, we will build it for you.

Or, you tell us your budget and we show you what you can get for your money. Full conversion prices excluding the vehicle range from A$49,000 to A$85,000.

Shell price

Average price for an empty shell, with 5 windows, roll out awning, door of your choice, 2 outside lockers, external gas cradle for 2 cylinders, 2 roof vents, cabin cut-out, engineering approval, based on following internal dimensions:

width	2m - 2.1m
height	1.9m - 2.1m
length	3.6m - 5.5m

A$28,000 - A$35,000, depending on choice of awning, windows and door brand, and on the desired exterior finish.

The Fiat Ducato at the top of this page is a good example for an empty shell. The pictured finish includes 2-pack metallic spray painting and decals, cabin rear wall and roof cut out and reinforced. Comes with engineering approval and is ready for registration. Just waiting for your own internal conversion, costs A$32,000 on your supplied vehicle.

All our Motorhomes comply with current ADR regulations.

© Copyright Easy Life Motorhomes Pty. Ltd. 1. April 2005  Last Update 16.07.2006